Innercoat® for Pipeline Reconditioning

Its ease of application and “forgiving” character in difficult applications make it an ideal all-purpose pipe coating.

End Use

To protect straight pipe or irregular metal surfaces from corrosion. It can be used for new services, field patching, weld cutbacks and pipeline reconditioning.

Application Procedures

Clean pipe surface free of loose rust and scale, loose coating, dirt, grease, moisture and other foreign matter. Heat Innercoat to between 250° and 350°F in summer and between 350° and 500°F in winter to ensure proper adhesion. Then pour or brush Innercoat directly onto the clean and dry surface. For straight pipe use the “granny rag” method. Once Innercoat is applied, wrap with Guard-Wrap™. A thin coating of Innercoat can then be applied over the Guard-Wrap for additional protection.

Packaging

• 47 lb. box
• 7 1/2 lb. blocks (10 per case) 75 lbs/case
• 7 1/2 lb.blocks, quartered (10 per case) 75 lbs/case

Advantages

• An effective pipe coating proven by over 50 years’ field use
• Excellent corrosion barrier Low moisture absorption and transmission
• Excellent dielectric barrier Excellent wetting and adhesion properties
• Excellent ductility
• Permanently inert
• Resistant to chemicals and bacteria commonly found in soils
• Easy to apply Compatible with other coating materials
• Can be reheated without altering composition
• No primers required
• No waiting before backfilling
• No dangerous fumes
• Nontoxic, noncarcinogenic
• Packaged in convenient 7 1/2 lb. blocks or 47 lb. box